Wind Speed and Direction Sensor
Biaxial ultrasonic anemometer (up to 90m/s)
ANESB ultrasonic sensor for measuring wind speed and direction , capable of measuring the characteristics of the wind along two orthogonal axes X, Y on the horizontal plane and their Cartesian resultant. Very robust construction in resin and aluminum alloy with anodizing treatment for outdoors. Linear, precise and extremely reliable in all conditions, very high dynamic response. The ease of use and installation make it an effective tool in environmental monitoring applications, where for various reasons, it is not possible to periodically maintain the instrumentation as in the case of mechanical anemometers. Heated version available.
Highlighted specs
No moving parts, with reduced maintenance and service costs
Robust construction, suitable for continuous operation in severe environmental conditions
Low power consumption
High measurement accuracy
Reliability and precision throughout the measuring range, without the need for further calibration
Complies with CE standards and EN 15518-3:2011
Dual-axis sonic anemometer (up to 50m/s)
The ease of use and installation makes it an effective tool in environmental monitoring applications, where for various reasons; regular maintenance of the equipment cannot be easily performed, as with mechanical anemometers.
Highlighted specs
- No moving parts, reduced maintenance and service costs
- Robust and reliable structure, suitable for continuous operation even in harsh environmental conditions
- Low power consumption
- Good accuracy on measurements
- Reliability and precision over the entire measuring range, no additional calibration required
- Complies with standards and EN 15518-3:2011
First Class Cup Anemometer - VV1
The VV1-N is a First Class, very high precision cup anemometer , designed to meet the most stringent wind measurement standards such as IEC61400-12 for wind monitoring . It is a high-performance instrument, MeasNet certified , built in aluminum alloy with high quality materials to ensure reliability and durability, allowing the sensitivity and precision characteristics to be maintained over time. Compliant with WMO (World Meteorological Organization) standards and EN 15518-3:2011 . Available in the low consumption heated version (<5W@12Vdc) for cold climates (mod. VV1R), and with normalized output signal ( frequency pulses, 0÷2Vdc, 4÷ 20mA, RS485/Modbus )
Highlighted specs
- Very high precision (First Class) <0.1m/s
- High linearity: R>0.9999
- Sturdy and compact aluminum structure
- Compliant with WMO standard and IEC61400-12, EN 15518-3:2011
- MeasNet and ISO17025 calibration
- High speed ball bearing rotor (MIL-L-6085 C)
- IP68 Connector, IP66 Body
- Complies with CE standards
- Heated version with low consumption (5W@12Vdc)
Wind direction encoder - DVE
The sensor for measuring wind direction (gonio-anemometer) is built with highly reliable and durable materials that allow it to maintain its initial sensitivity and precision characteristics over time. The mechanical robustness allows the sensor to withstand strong winds and sudden gusts (up to 300km/h). The use of a special magnetic encoder ensures extremely high resolution and precision by eliminating any mechanical friction in a complete operating angle of 360° . The electrical output is standardized in voltage or current (4÷20mA or 0÷2Vdc) or on digital RS485/Modbus, also available in the version with low power heater (5W@12Vdc) . The sensor is made in compliance with WMO (World Meteorological Organization) standards and EN 15518-3:2011 .
Highlighted specs
- Extremely high precision sensor (better than 0.3°)
- Complies with WMO standard, EN 15518-3:2011
- Sturdy and compact aluminum structure
- Typical measuring range 0÷360°N
- High dynamic response to wind with almost zero friction
- Suitable for marine applications
- Available with low temperature heater
- CE compliant with standards and EN 15518-3:2011
- IP68 quick-fit connection
Triaxial Sonic Anemometer - ANEST
The ANEST ultrasonic sensor is a triaxial anemometer that can measure wind speed and direction, UVW Cartesian components, sound speed and sound temperature, with very high precision. Made of resin and anodized aluminum alloy, it is precise and extremely reliable in all conditions with a high dynamic response.
The ease of use and installation makes it an effective tool in environmental monitoring applications, where for various reasons, regular maintenance of equipment cannot be easily performed, as with mechanical anemometers. Available in versions with analog voltage or current output (4÷20mA, 0÷1V, 0÷5V) and digital (ModBus RS485). Heated option available .
Highlighted specs
- No moving parts, with reduced maintenance and service costs
- Low power consumption
- High measurement accuracy
- Up to 5 analog voltage outputs (on request), with different measuring ranges.
- Reliability and precision throughout the measuring range, without the need for further calibration
- Compass with magnetoresistive sensor for automatic alignment to Magnetic North
- Integrated heater option for low temperature conditions Complies with CE standard
